Need more help? Click here to schedule a service call
For Compact
ICS (CICS) and Modular ICS (MICS) phone systems with
software version V2.0 and higher (usually installed after
1997). This will also change the time in the voicemail:
1. FEATURE ** 8463 (TIME)
2. PSWD: XXXXX
3. Press CHANGE or NEXT (depending on what needs to be
adjusted)
For 3X8, 6X16, Modular 8X24, Modular ICS (MICS) systems
with T1 Rel. 1 software (usually installed before 1997):
1. FEATURE ** 23646
2. PSWD: XXXXX
3. 1. Sys Speed Dial: press NEXT until you reach 3. Time
& Date
4. Press SHOW
5. CHANGE or NEXT depending on what needs adjusting
6. Rls when done.
The voicemail on older systems may have its own clock
that must be adjusted:
1. FEATURE 984
2. Log: 23646
3. Follow the prompts to change the time
4. Press the Rls when done
Note: you will need to use the Programming Overlay found
in the back of the System Coordinator Guide or under the
FAQ section of this website to see what buttons represent
Show, Next, Back, and Heading.
All passwords are shown as XXXXX.
We hope you
find these tips and tricks helpful. These documents
should provide sufficient information to program a Cremer
Technologies programmed system. Cremer Technologies takes
no responsibility for any problems arising from a
customer attempting to administer their via system
programing.